Fortinet FortiGate 3000, Administration Manual

Page: 89 / 398

System config Options
FortiGate-3000 Administration Guide 01-28006-0010-20041105
89
Figure 29: System config options
To set the system idle timeout
1 Go to System > Config > Options .
2 For Idle Timeout, type a number in minutes.
3 Select Apply.
To set the Auth timeout
1 Go to System > Config > Options .
2 For Auth Timeout, type a number in minutes.
3 Select Apply.
Idle Timeout Set the idle time out to control the amount of inactive time before the
administrator must log in again. The maximum
admintimeout
is 480
minutes (8 hours). To improve security keep the idle timeout at the default
value of 5 minutes.
Auth Timeout Set the firewall user authentication timeout to control how long an
authenticated connection can be idle before the user must authenticate
again. The maximum
authtimeout
is 480 minutes (8 hours). The
default Auth Timeout is 15 minutes.
For more information, see
“Setting authentication timeout” on page 242 .
Language Select a language for the web-based manager to use. Choose from
English, Simplified Chinese, Japanese, Korean, or French.
LCD Panel Select the PIN Protection check box and type a 6-digit PIN.
Administrators must enter the PIN to use the control buttons and LCD.
See “To set PIN protection for the LCD panel” on page 90 .
Detection Interval Set the dead gateway detection failover interval. Enter a number in
seconds to specify how often the FortiGate unit pings the target.
Fail-over Detection Set the ping server dead gateway detection failover number. Enter the
number of times that ping fails before the FortiGate unit assumes that the
gateway is no longer functioning.