manualshive.com logo in svg

Fortinet FortiGate 3000, Installation Manual

Share
Download
Fortinet FortiGate 3000 Installation Manual Download Page 3

Contents

FortiGate-3000 Installation Guide

01-28005-0026-20041101

3

Table of Contents

Introduction ............................................................................................................  5

Secure installation, configuration, and management ..........................................................  6

Web-based manager ......................................................................................................  6
Command line interface ..................................................................................................  7
Setup wizard ...................................................................................................................  7

Document conventions .......................................................................................................  7
Fortinet documentation .......................................................................................................  9

Comments on Fortinet technical documentation.............................................................  9

Customer service and technical support...........................................................................  10

Getting started .....................................................................................................  11

Package contents .............................................................................................................  11
Mounting ...........................................................................................................................  12
Turning the FortiGate unit power on and off .....................................................................  13
Connecting to the web-based manager ............................................................................  14
Connecting to the command line interface (CLI)...............................................................  15
Factory default FortiGate configuration settings ...............................................................  16

Factory default NAT/Route mode network configuration ..............................................  17
Factory default Transparent mode network configuration.............................................  18
Factory default firewall configuration ............................................................................  18
Factory default protection profiles.................................................................................  19

Planning the FortiGate configuration ................................................................................  20

NAT/Route mode ..........................................................................................................  20
NAT/Route mode with multiple external network connections......................................  21
Transparent mode.........................................................................................................  22
Configuration options ....................................................................................................  23

Next steps .........................................................................................................................  24

NAT/Route mode installation..............................................................................  25

Preparing to configure the FortiGate unit in NAT/Route mode .........................................  25

DHCP or PPPoE configuration .....................................................................................  26

Using the web-based manager .........................................................................................  27

Configuring basic settings.............................................................................................  28

Using the front control buttons and LCD...........................................................................  29
Using the command line interface.....................................................................................  30

Configuring the FortiGate unit to operate in NAT/Route mode .....................................  30

Using the setup wizard......................................................................................................  33

Starting the setup wizard ..............................................................................................  34
Reconnecting to the web-based manager ....................................................................  34

Connecting the FortiGate unit to the network(s) ...............................................................  34
Configuring the networks ..................................................................................................  35

Summary of Contents for FortiGate 3000

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands