manualshive.com logo in svg

Fortinet FortiGate 1000A, Administration Manual

Share
Download
Fortinet FortiGate 1000A Administration Manual Download Page 131

System Maintenance 

Backup and restore

FortiGate-1000A/FA2 Administration Guide

01-28011-0254-20051115

 131

5

Select OK to restore all configuration files to the FortiGate unit.
The FortiGate unit restarts, loading the new configuration files.

6

Reconnect to the web-based manager and review your configuration to confirm that 
the uploaded configuration files have taken effect.

To back up individual categories

1

Go to 

System > Maintenance > Backup & Restore

.

2

Select the Backup icon for the type of file you want to back up. 

3

Save the file.

To restore individual categories

1

Go to 

System > Maintenance > Backup & Restore

.

2

Select the Restore icon for the type of file you want to restore.

3

Enter the path and filename of the file, or select Browse and locate the file.

4

Select OK.
If you restore the system configuration, the FortiGate unit restarts, loading the new 
system settings. You should then reconnect to the web-based manager and review 
your configuration to confirm that the uploaded system settings have taken effect.

5

Select Return. (This step does not apply if you restore the system configuration.)

To back up VPN certificates

1

Go to 

System > Maintenance > Backup & Restore

.

2

For VPN Certificates, All Certificates, select the Backup icon.

3

Enter a password and select OK.
Retain the password. You will need it to restore the certificates.

4

Save the file.

To restore VPN certificates

1

Go to 

System > Maintenance > Backup & Restore

.

2

For VPN Certificates, All Certificates, select the Restore icon.

3

Enter the password used when creating the backup file.

4

Enter the path and filename of the backup file, or select Browse and locate the file.

5

Select OK.

Summary of Contents for FortiGate 1000A





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands