Fortinet FortiAPCam-214B, Quick Start Manual

Page: 6 / 28

Page 6
Connecting your Unit
Using the provided mounting hardware, attach the FortiAPCam unit to a
ceiling, as described in the previous section.
Adequate grounding must be provided to the unit and the PoE injector, in
compliance with your local electrical code or regulations.
Caution: This device complies with IEEE 802.3af PoE specification. Do
not use any PoE injectors that are not IEEE 802.3af compliant as they may
damage your device.
To connect the FortiAPCam unit
1.
Connect the unit to a PoE switch.
2. Connect your FortiGate or FortiWiFi unit to the switch to use the
access point function.
3. Connect your FortiRecorder to the switch to use the video
surveillance function.
Note: For FortiWiFi units, the wireless controller feature is only supported
on units running FortiOS 4.0 MR3 and higher.
Caution: This equipment is to be connected only to PoE networks without
routing to the outside plant.