6
7
Installation
1
The unit can be mounted on a
wall or ceiling
using the provided
wall/ceiling mounting
hardware kit
, and to an appropriate
ceiling
using the
T-rail mounting hardware kit
.
To attach the unit to a wall or ceiling
1. Select an appropriate location, then mark the
locations on the
wall or ceiling
where the
anchors
will
be inserted.
2.
Drill
the mounting holes, then insert the
anchors
into
the holes.
3. Attach the
mounting bracket
to the anchors using
two
P3.5x32 screws
.
4. Insert two
P2.6X12 screws
into the bottom of the
unit, leaving enough of the screws exposed so that
the unit can be mounted to the
mounting bracket
.
If extra space is required between the unit and the
mounting bracket
, use the
spacers
and
P2.6x25
screws
from the
T-rail mounting hardware kit
.
5. Mount the device on the mounted
mounting bracket
then rotate it
clockwise
to secure it in place.
To attach the unit to a T-rail
1. Attach the
T-rail clips
to the bottom of the unit using two
P2.6X10 screws
.
If extra space is required to accommodate drop ceiling tiles, use the provided
spacers
and
P2.6x25 screws
.
2. Line up the connected
T-rail clips
with an appropriately sized rail, then
press
the unit
into the rail until it
snaps
into place.
5.0G
5.0G
2.4G
2.4G
FortiAP 223C
2
1
Note:
To protect your device from unauthorized removal, use the
Kensington
Security Slot
to attach a
cable lock
(not included).
Note:
Two
sizes of
T-rail clips
are included
in the
mounting
kit:
2.38cm
(15/16in)
and
1.43cm
(9/16in)
.
Mounting
Anchors
Mounting
Bracket
P2.6x12
Screws
P3.5x32
Screws
P2.6x10
Screws
Clips
P2.6x25
Screws
Clips
Spacers
Rail
Clip
Kensignton Security Slot
