B
Cabling
The unit requires 48V DC power, which is delivered by the
PoE injector
over a
straight-through
Ethernet cable
.
To install the weatherproof connector
1.
Unscrew the coupling ring from the waterproof connector, remove the
sealing gland, and thread the RJ-45 plug through the connector
components.
2.
Insert the RJ-45 plug into the PoE port on the unit and install the
weatherproof panel connector onto the threaded coupling at the port.
3.
Slide the sealing gland along the cable into the panel connector.
4.
Thread the coupling ring into the panel connector and tighten it until the
sealing gland is compressed, making a watertight seal on the cable.
12
