Installation
Page 3
FortiFone User Guide
Installation
Attaching the stand
For desktop use
1.
Line the 4 posts on the top of the base up with the 4 holes on the back of the phone.
2.
Slide sideways into place until secure.
For wall mounting
1.
Attach top part of base to the phone.
2.
Mark and drill three 5/16" (7 mm) holes according to their placement on the base.
3.
Insert plastic wall anchors (not included) into the holes. Place a screw into the bottom hole,
leaving about 1/8" (2.5 mm) exposed.
4.
Slide the base over the bottom screw. Secure the base using screws in the top two holes.
5.
Slide the phone onto the base and ensure the phone is secure. It may be necessary to
remove the phone and tighten or loosen the screws for secure mounting.
