Hardware installation
14
1. Remove the FIM-7901E module from its packaging.
The module levers are closed when you first remove a new module from its packaging.
2. Align the module with the chassis slot, slowly slide the module into the slot, stop at
about 1-2 inches from fully inserting it.
Module levers
Module levers
Slide in slowly
Stop position
3. Unlock the left and right module levers by pushing the power sliders up until the
levers pop open.
Before sliding the final portion of the module into the chassis fully open both levers by pushing the power sliders up.
Fully open both levers to avoid damaging the lever mechanism. Damaging the levers can prevent the module from
connecting to power.
Levers pop open
Power
slider
up
Power
slider
up
FIM-7901E Processing Module Guide
Fortinet Technologies Inc.
