Fortin Electronic Systems ANT-FMH-2W, User Manual

Page: 4 / 14

USING THE REMOTE CONTROL
The remote starter is equipped with two 4-button multi-channel remote control .
COMMAND
TIME
PRESSED
DESCRIPTION
LOCK 0,5 SEC.
Locks all doors, arm the anti-theft
system and activates the Alarm (if
installed). Press LOCK for 3 sec-
onds to activate the Panic Mode
UNLOCK 0,5 SEC.
Unlocks all doors, disarms the
anti-theft system and deactivates
the Alarm (if installed).
START
3 SEC.
Remote-start the vehicle. Press
START again to reset the runtime.
(See: remote-starter features,
page 7)
TRUNK
(FUNC-
TION)
3 SEC.
Opens the trunk, and deactivates
the Alarm (if installed). The Alarm
ignores the trunk zone until it is
closed.
Press and
release
FUNCTION and then
press START
STOP 0,5 SEC.
Remote-Stop.
Press and Qre-
lease
FUNCTION and then
press LOCK
AUXIL-
IARY1
0,5 SEC.
AUXILIARY1 (See: Auxiliary use,
page 10):
Press and
release
FUNCTON and then
press UNLOCK
AUXIL-
IARY2
0,5 SEC.
AUXILIARY2 (See:Auxiliary use,
page 10)
+
Press simultane-
ously
FUNCTON and
LOCK
LOCKED
THE RE-
MOTE
Until the
RED DEL turn
on.
See :
REMOTE LOCKING AND
UNLOCKING, page 10
UNLOCKED
THE RE-
MOTE
Until the
GREEN DEL
turn on.
See :
REMOTE LOCKING AND
UNLOCKING, page 10
The remote fl ash DEL BLUE when a button is pressed.
The remote fl ash DEL GREEN when the remote is transmitting the informations. For car command
confi rmation see: ALARM ACTIVITY, page 11
REMOTE-STARTING
REMOTE-STARTING THE VEHICLE
This Remote-Starter supports both manual and automatic transmission vehicles. For manual transmis-
sion vehicles see the Ready Mode section.
REMOTE-STARTING
STEP
1
To remote-start the vehicle press the START button for approximately 3 sec-
ond.
STEP
2
The parking lights will turn on to indicate a response to the Remote-Start
signal.
Page 4 / 14