OVERVIEW
The RCP-502 Compact Remote Control Panel
provides simple access to Integrity
system AV cards and frames. Though this control panel may control all cards on the
network, it is recommended for either light duty in managing multiple devices or heavy
duty when managing a single card or card pair from a remote location in your facility.
The RCP-502 may also be converted for use as a local control panel by attaching it to an
FRM-501 Compact System Frame. See addendum.
INSTALLATION
Mount the panel in a rack using the screw hardware kit provided.
Connect to an Ethernet switch using an RJ-45 patch cable. Connect the external power
supply model PSU-502 to the 5V DC input connector on the rear of the RCP-502 case.
Power will be applied immediately when you connect to an AC power source.
Compatibility
The RCP-502 utilizes an Ethernet port to connect to Integrity system frames and cards
over a dedicated 10/100 Mbps switch. The RCP-502 is compatible with the following
Integrity system products:
•
All integrity system AV cards with SW versions 8.2 or higher.
•
RCI-300
•
RCP-303
•
RCP-503
•
FRM-504
•
FRM-501
•
FRM-304 (see note 1 below)
Note 1: Older FRM-304 frames which utilize an LCP processor card must be upgraded
to the ZFCB processor card prior to operation with the RCP-502. Software upgrades to
the AV cards installed in that frame may also be required. Consult factory.
RCP-502 User Manual
Page 2
