Fortec Star iBASE MB995, Manual

Page: 33 / 81

24 MB995
User’s Manual
2.5.8 Front Panel Settings Connector (J18)
Pin Signal Name Pin Signal Name
1 Power LED+ 2 SPK
3 Ground 4 NC
5 Power LED- 6 Ground
7 NC 8 SPK (VCC)
9 Ground 10 NC
11 Ground 12 NC
13 Power BTN 14 Power BTN
15 NC 16 NC
17 Reset BTN 18 Reset BTN
19 HDD LED+ 20 HDD LED-
J18 is utilized for system indicators to provide light indication of the
computer activities and switches to change the computer status. It provides
interfaces for the following functions.
•
ATX Power ON Switch (Pins 13 and 14)
The 2 pins make an “ATX Power Supply On/Off Switch” for the system
that connects to the power switch on the case. When pressed, the
power switch will force the system to power on. When pressed again,
it will power off the system.
•
Hard Disk Drive LED Connector (Pins 19 and 20)
This connector connects to the hard drive activity LED on control
panel. This LED will flash when the HDD is being accessed.
2
20 19
1