4.2 Factory Setting
Press
OK
key to enter into the
Factory
Setting
window.
Select Yes button and press
OK
key to return
to the factory setting. All searched channels
and set information will be erased.
Select No button and press
OK
key to cancel
this operation, or press
MENU
or
EXIT
key to
cancel and exit.
4.1 Information
Press
OK
key to the Information window.
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode and Dump. When users switch the
upgrade mode,
Upgrade File
will show the corresponding file according to the
table below:
4.3 Upgrade by USB
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
Upgrade Mode File feature
All code : File named as "*.abs"
Main Code: File named as
*.bin
Radio back: File named as "*.m2v",
the picture will be used
as both radio back and
menu back
Default db: File named as "*.bin"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
Summary of Contents for FS-4400
Page 1: ......
