background image

General Safety Regulations

7

•  Attention! High voltage! Never open the device by yourself.
•  In case of unusual noises, burnt smell or smoke unplug the power cable.
•  Do not insert objects into the device through the ventilation slots.
•  If the same picture is displayed over a longer period of time, an after-image may arise.
•  When exchanging batteries of the remote control, pay attention to the polarity. Keep 

batteries away from children and ensure an environmentally correct disposal.

•  Protect your device from water splash.
•  When cleaning, please make sure that no liquids get into the device.
•  Screens and surfaces can be easily scratched. Therefore, please use the prescribed 

cloth only.

•  Please use a soft, moist cloth for cleaning.
•  For cleaning the screen, please use only commercially available screen cleaner. Do not 

spray the cleaner directly to the device but onto a cloth.

•  Please clean ventilation slots regularly to ensure a good air circulation.

•  Do not install the device in places where it is exposed to environmental impacts such 

as rain or direct sunlight.

•  Do not install the device in places where it is exposed to high humidity, dust or smoke. 

In case of doubt, please contact your sales partner. 

• 

Ensure sufficient ventilation of the device.

•  Keep a minimum distance of at least 10 mm devices to the wall, for devices with inte-

grated PC of at least 40 mm.

• 

Ensure compliance with the operating temperature.

Summary of Contents for DISTEC Video Wall Series




























Reviews: