Touch Sensors
14
6.
Touch Sensors
POS-Line monitors are available with touch option. Depending on the panel size, different touch systems and touch technologies are
used. If the monitor has been ordered with touch option, the touch sensor and touch controller are installed at factory.
POS-Line IQ:
The actual touch driver is pre-installed on these systems if ordered with operating system. The touch can be put directly into operation.
POS-Line Video:
The drivers for these monitors must be installed on your PC system. HID devices do not need drivers for Windows 7 and higher. Please
contact our support center if you are using LINUX based computers.
If a driver is required, the touch on this driver must be calibrated. Is it a HID Touch, Windows calibration in the control panel must be
performed.
path:
Control Panel \ All Control Panel Items \ Tablet PC Settings
Note: All drivers for the touch sensors can be found on our website:
https://www.distec.de/en/service/down-
. The following table gives an overview over the touch systems including web ad-
dresses for driver downloads.
Touch system overview:
Panel size
Touch technology
Driver download
15”
5-wire resistive
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
17“
5-wire resistive
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
17.3“
P-CAP
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
19“
5-wire resistive
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
21.5”
P-CAP
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
24”
P-CAP
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
