1
Step
2
: Check the door balance
1
Hold the top of the dishwasher firmly.
2
Open the door slowly, then release it. If the door drops, increase the spring tension. If the door closes, decrease the
spring tension.
3
Continue moving the spring pin until the door is balanced. Adjust both springs to the same tension.
Caution:
•
Opening the door of your dishwasher before it is installed will cause it to tip forward. Do not open the door until you are ready to
install your dishwasher.
•
If it is necessary to open the door, hold the top of the dishwasher securely with one hand and hold the door with the other hand.
Increase
Decrease
Step
3
: Adjust the leveling legs
1
Move the dishwasher close to the installation location and lay it on its back.
2
Measure the installation height and the dishwasher height.
3
Extend the leveling legs out from the dishwasher base .25 in. (6.35 mm) less than the installation height.
Note:
Make sure that the leveling feet are loosened before standing the dishwasher upright. They may be tight from
shipping/packaging.
Note:
If you choose the mood decoration door (about 3.5KG), you can choose the fifth groove counting from the
top groove. If you choose the metal decoration door (about 7.5KG), you need fix the springs to the third groove in
the same method.
UP
DOWN
UP
DOWN
UP
DOWN
or
Adjust to .25 in. (6.35 mm)
less than the installation
height
Adjust to .25 in. (6.35 mm)
less than the installation
height
1
