INSTALLATION
INSTALLATION
14
If a longer drain hose is required, add up to 42'’of length for a
total of 10 ft. to the factory installed hose. Use 5/8'’or 7/8'’inside
diameter hose and a coupler to connect the two hose ends.
Secure the connection with hose clamps.
Connect drain line to air gap, waste tee or disposer using either
previously determined method.
Method 1 -Air gap with waste tee or disposer
Method 2 -High drain loop with waste tee or dis- poser
STEP 8 - CONNECT DRAIN LINE
Figure L
Figure M
Figure O
Figure N
;OLKYHPUOVZLTVSKLKLUK^PSSэ[ϦVYKPHTL[LYJVUULJ
-
tions on the air gap, waste tee or disposer. Cut on the marked line
as required for your installation.
FOLLOW ALL LOCAL CODES AND ORDINANCES.
Cutting Lines
1"
5/8"
IMPORTANT: Do not cut corrugated portion of hose
Hose Clamp with clamps.
Coupler
Hose Clamp
NOTE
:
TOTAL DRAIN HOSE LENGTH MUST NOT EXCEED 10
FEET FOR PROPER DRAIN OPERATION.
Water Line Connection
Waste Tee Installation
Disposer Installation
Draining hose hanger
Min.
Draining hose hanger
18"
Min.
Min.
18"
Min.
Waste Tee Installation
Disposer Installation
