Hub Expansion Diagram
Specifications
AB-61
Description
A-BUS hub to drive 1 or 2 A-BUS room units with
status override and IR emitter outputs. Supplied
with a system power supply but not with a status
power supply.
System Specifications
Power Unit APS-40, 24-volt 4-amp DC plug
pack power supply included.
12v 200 mAmp DC plug pack
(optional)*
System Activation
Status Override when connected
to A-BUS/
ready
output trigger via
12VDC input.
Dimensions (WHD)
Case size:
134 x 78 x 27.5 mm
AB-62
Description
Expansion In & Out
Expandable, multiple AB-62 can be used if more
than four room units are required
Expansion IN can also be used with a ABS-40 to
give four input source select
Can be used to expand the A-BUS outputs of the
ABX-88, ABX-84, up to four.
System Activation:
Default Automatic music
sensing. Goes back to mute 30 seconds after
music cease. Status Override when connected to
A-BUS/
ready
output trigger via 12VDC input.
Features
Drives from 1 to 4 A-BUS amplified devices
(volume control modules or A-BUS/
direct
speakers
Four IR emitter outputs (3.5mm jack)
A-BUS outputs (4 x RJ-45)
Audio input 2 x RCA phone sockets
Status override socket (2.1mm DC)
Local IR input, compatible with standard Forté IR
receivers
System Requirements
Power Units APS-40, 24-volt 4-amp switched
mode power supply included. 12v
200 mAmp DC plug pack (optional)
Status
Auto Status detection / Override
option
Dimensions Case size:
184 x 83 x 30mm (WHD)
AB-663
Description
Expansion In & Out
Expandable, multiple AB-663’s can be used if
more than eight amplified devices are required
Expansion IN can also be used with a ABS-40 to
give four input source select.
Can be used to expand the zone outputs of the
ABX-88, ABX-84, up to four.
System Activation:
Default Automatic music
sensing. Goes back to mute 30 seconds after
music cease. Status Override when connected to
A-BUS/
ready
output trigger via 12VDC input.
Features
Drives from 1 to 8 A-BUS room units (volume
control modules or A-BUS/
direct
speakers
Four IR emitter outputs (3.5mm jack)
A-BUS outputs (8 x RJ-45)
Audio input 2 x RCA phone sockets
Status override socket (2.1mm DC)
Local IR input, compatible with standard Forté IR
receivers
System Requirements
Power Units APS-40, 2 x 24-volt 4-amp
regulated power supply included.
12v 200 mAmp DC plug pack
(optional)
Status
Auto Status detection / Override
option
Dimensions Case size:
240 x 105 x 30mm (WHD)
ABK-50
AB-62
AB-663
ABX-88
ABK-4PD
(110 punchdown
termination ony)
A-BUS Termination Plate:
All Cat5 cables should be terminated
at the main distribution point using wall
plate(s) fitted with the corresponding
number of RJ-45 sockets connected as
per the T568A standard.
A-BUS is a registered trademark of LeisureTech Electronics. The A-BUS technology is covered by the following patents - United States US
7,181,023, 7,668,318, 6,389,139; Australia AU 739808; New Zealand NZ 502982; Mexico MX 241196; Canada CA 2301062.
All features and specifications are subject to change without notice. www.leisuretech.com.au
Warranty
Please contact your place of purchase for warranty information.
