Warning
:: Warning
www.fort-fr.com
Do not insert the insert tube into any flammable gas or liquid (such as a fuel tank) to avoid dangers.
Avoid direct exposure to sunlight for long periods of time.
Please do not use the VISIO PRIME in a medical facility or on an airplane, as the wireless signal
may interfere with other critical equipment nearby.
Do not heavy force to screw the probe head further than half a screw for focussing. Screwing
further using force damages the entire probe head and optics!
Never insert the probe in plant parts, if weld or cutting work is being undertaken simultaneously or
soon. Likewise, the probe must never be inserted if further inspection procedures like eddy current
or radiography tests are being undertaken on the same plant part. Never insert the probe in plant
parts, which are not fully switched-off (e.g. danger from rotating plant components) or cooled down.
Never look directly at the light emission in the camera head. There is danger of lasting
eye injury or at least a long-lasting eye irritation with accidental consequences through a
temporarily restricted power of vision.
Avoid tight coils or even knots in the tube. Do not step onto the insertion tube or camera head.
Do not smash the camera head with it’s optics onto the floor or cause any other possible impact to
the instrument. This can damage your probe!
Do not use the probe for transporting the system! This can damage your probe!
To transport the system use the handle on the control unit.
Summary of Contents for Visio Prime
Page 24: ...Affix Affix www fort fr com ...
