P a g e
|
10
Machine operation
MACHINE USE
TOUCH SENSOR HOPPER
STAGE
1
Fold down hopper tray
Ensure Tactor and Chipper
are on leval ground
2
Ensure tractor horsepower and lift arm
capacity match that of the chipper
Start Tractor
3
Allow engine to run for 30 seconds then
open throttle to 540rpm
4
For forward feed, touch green button
twice
5
Feed material
6
To stop, touch red button or push trip bar
7
To reverse feed, touch green button
once
8
To stop machine
9
Touch red button or push trip bar
10
Close throttle to minimum on the Tractor
11
Switch off ignition and remove key
12
Before transporting machine
14
Sweep out debris from hopper
15
Close hopper tray by lifting fully up
against stops and engage latch
Summary of Contents for PT6
