Problem
1)
Possible cause
Remedy
Not possible to
change the pro-
gram or option.
After cycle start it is not possible to
change the program or option.
Turn the tumble dryer off and on.
Change the program or option as
required.
Not possible to
select an op-
tion. Acoustic
signal is emit-
ted.
The option you tried to select is not
available for the selected program.
Turn the tumble dryer off and on.
Change the program or option as
required.
No drum light
Defective drum lamp.
Contact the service centre to re-
place the drum lamp.
Unexpected
duration time
on the display.
The drying duration is calculated ac-
cording to load size and dampness.
This is automated — the appliance
is working correctly.
Program inac-
tive.
The water container is full.
Drain the water container, push the
Start/Pause button.
3)
Drying cycle too
short.
Load size is small.
Select time program. The time value
must be related to the load. To dry
1 item or a small amount of laundry
we recommend short drying times.
The laundry is too dry.
Select time program or higher dry-
ness level (e.g.
extra dry (Extra-
trocken)
)
Drying cycle too
long
6)
The filter is clogged.
Clean the filter.
The load is too large.
Do not exceed the maximum load
size.
The laundry was not spun sufficient-
ly.
Spin the laundry well.
Too low or too high room tempera-
ture - this is not the appliance mal-
function.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
1)
If there is an error message on the display (e.g.
E51
): Turn the tumble dryer off and on. Select a new program.
Push the Start/Pause button. If the appliance does not operate contact the service centre and provide the error
code.
2)
Follow the program description — see PROGRAMS chapter
3)
See chapter CARE AND CLEANING
4)
Only dryers with Dryness (Trockengrad) option
5)
See HINTS AND TIPS chapter
6)
Note: After a maximum of 5 hours the drying cycle ends automatically.
19
