Forest Crane C 5,1D
© 2005 FORS MW Ltd www.forsmw.com
Page 20
3.4 DAILY INSPECTIONS
Examine visually the loader. Note defects and
failures that might affect safety. Repair possible
defects and failures.
Check there is no leakages on hydraulic system,
nor damaged hoses.
Check loaders fastening bolts, booms
articulations nuts, grapples fastening, loaders.
Grease the loader if necessary (see lubricating
instructions).
Drive through every function to its extreme
position.
Check that the oil is on level as shown in figure.
The oil level needs to be checked regularly. The oil level needs to be filled up to 1 cm underneath
the refilling hole. For direction of plug se arrow above.
3.5 ACTING IN DANGEROUS SITUATION
IF THE LOADER STARTS TO FALL OVER LOWER THE
LOAD CAREFULLY TO THE GROUND!
Do not drop the load by opening the
grapple!
Do not jump out from vehicle.
If the booms start descending due
overloading try to transfer the load closer
to the column; do not open the grapple.
