8. Turn the cart back on its side and attach the middle shelf to the partially assemble cart
frame.
Ensure the screw holes on the side of the middle shelf are on the same side as the
holes in the legs for the handle.
9. Turn the now assemble cart right side up.
10. Attach the side arms between two legs on each side of the cart.
Ensure the side arm with
the screw holes is attached to the same side as the legs with the holes for the handle.
11. Carefully remove the bricks from the inside of the oven. This will make it lighter and easier
to move. Handle the bricks with care as they are fragile.
12. Using some the polystyrene from the packaging underneath the oven, turn the oven on its
back. This step should be performed by two people.
13. Turn the cart on its side and attach it to the bottom of the oven. Once all socket screws are
firmly in place and tightened, turn the oven right side up.
14. Firmly tighten all socket screws.
15. Insert handle into the legs and tighten all 4 screws securely.
16. On the opposite side of the handle, insert two plastic head screws halfway into the lower of
the two screw holes on the inside of each leg.
17. Holding the folding shelf in place, insert a plastic head screw through each side of the
folding shelf hinge and into the top screw holes on the inside of each leg. Do not over tighten as
the shelf should move easily but securely.
18. To extend the folding shelf, lift the shelf and guide the hooks of the hinge onto the top two
plastic head screws on the inside of each leg.
Summary of Contents for PRONTO 500
Page 1: ...Assembly Guide...
