APPENDIX 4
USB operations
For windows user it is necessary to download drivers, for MAC it is ready to use.
in the download section marked
DOWNLOAD Drivers for windows.
Note Superstereo is owned by Formula Sound Ltd, the USB in the NN106 is the
same as the USB in the Superstereo DN78.
1 For windows download the driver.
2 Unzip the file into a folder of your choice.
3 Open folder Superstereo windows driver 2, and then Superstereo driver folder.
4 Run either setup 32 for windows XP or run setup64 for 64 bit versions of windows
(windows 7 and later).
5 Follow on screen instructions, pressing install option when asked to install driver
software.
6 A message will pop up to say the Superstereo driver is installed.
7 Once you have pressed the finish button, you can then connect to the NN106 USB
port.
8 To configure the soundcard for use goto Hardware and Sound in the control panel
and click on Manage audio devices.
9Select SUPESTEREO speakers option and click configure.
10 For 4 channel operation (2 stereo channels) click on Quadrophonic, for 2 channel
(one stereo channel) operation click on stereo.
11 Click finish to complete.
12 To change your sample rate and quality repeat steps 8 but click on properties
instead, then click on advanced.
13 Select your desired sample rate and bit rate.
14 Your NN106 is now ready to use.
For MAC
1 Plug into NN106
2 Open MIDI and audio setup
3 Select superstereo driver and select the required sample rate up to 192Khz.
4 Go into configuration and select either 4 channel (2 stereo channels) or 2 channel
mode (one stereo channel).
5 Your NN106 is now ready to use.
The USB will work with a range of DJ software such as Traktor.
