LIGHT COLUMN BOLLARD
SURFACE MOUNT WITH J-BOLTS INSTALLATION INSTRUCTIONS
page 3 of 3 | Rev. 08-01-14
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
T 800.451.0410 | www.forms-surfaces.com
Remove top cap and lens
• Use strap wrench to unscrew stainless
steel top cap by turning
counterclockwise.
• Remove top cap and lens.
Insert lamps
• Insert or replace lamps.
Replace lens and top cap
• Replace lens.
• Place stainless steel top cap on top of
bollard and twist clockwise. Tighten with
strap wrench.
STEP BY STEP
FOR ALL STANDARD LIGHT COLUMN BOLLARDS
7
8
9
