Troubleshooting
Questions
Solutions
The screen is not displayed
Turn off the projector and remove the power cord；
reinsert the power cable and restart the machine.
Turn off the projector and remove the power cord；
reinsert the power cable and restart the machine.
Turn off the projector and remove the power cord；
reinsert the power cable and restart the machine.
The Android system crashes
A screen display error
The remote is missing
or not paired
Turn off the projector and remove the power cord. Reinsert the
power cord after waiting for five minutes, and the system will
restart automatically. Then re-pair the remote control.
The system will automatically turn
itself off after an overheating warning
Check that there are no obstacles impeding the system's air intake
vent to ensure that the cooling flow can proceed normally. Restart
the machine according to the method above.
Other internal system faults
Please contact Formovie Customer Service.
- Ensure that the projector is turned off and the power cord
is removed before cleaning.
Note:
- This projector is not water resistant. Do not allow any liquid
to get into the projector's power indicator, air vents,
connection ports, and speaker grilles.
11
Please take down the cover when cleaning lens. Rotate the
cover in counterclockwise motion, then take it down while
the dust cover dot points at the circle. After the lens
cleaning is completed, fit on the cover and rotate in
clockwise motion. The cover is reset while the dust cover
dot points at the dot outside.