Dimensions
Model:
962 (h) x 500(w) mm ROUND
Height
962mm
Width
500mm
Depth
mm
Bars
Electrical
Wattage
40W
Supply 230-240V ~ 50Hz
Ingress Protection Rating: IP34 – Splashproof Class I
appliance – requires earth connection
WARNING:
•
If this towel warmer overheats to the touch (i.e over 40
o
C), disconnect immediately
•
If this unit tips over, disconnect
,
make it upright ensuring that the towel warmer is
level (stable) and only
t
hen plug it in.
Specifications
Caution:
As with any electrical appliance, you should be aware of basic safety precautions when using this heated towel
warmer.
Please read these instructions, and file them for future reference:
•
This appliance is intended to warm and dry towels and bathrobes
and not for other purposes
. Because this
appliance gets hot, young children and infirm people should be closely supervised when nearby.
•
This unit is not for outdoor use.
Do not
use
this unit in
wet locations like a
shower,
sauna
, hot tub, pool
or
any
where it will be exposed
to water.
•
This towel
warmer
is designed to carry no more than two large towels. Exceeding this limit could result in
the discoloration of the towels due to heat build up.
•
Children should not be allowed to play with this unit.
•
Always unplug the towel
warmer
when not in use.
•
When cleaning this towel
warmer
, use cleaners recommended for stainless steel surfaces only.
•
Do not put the towels or anything else which has been in contact with hazardous liquids on this towel
warmer
.
•
Use this appliance only on the voltage specified on the rating label.
•
Electrical work to be performed by a registered electrician.
•
Do NOT immerse the towel
warmer
in any liquid.
•
Make sure the supply cord never touches heated surfaces.
•
If the electrical cord or connection is damaged DO NOT attempt to repair; please contact the supplier.
T
1300 62 11 51
E
www.formebathroomcollection.com.au
