![background image](http://html1.mh-extra.com/html/formax/fd-8250cc/fd-8250cc_operators-manual_2320070004.webp)
08/2011
Classic 104.3
11
english
1 2 3
4
5
6
HSM GmbH + Co. KG
Austrasse 1-9
88699 Frickingen / Germany
1 Cut material container
2 Feed
opening
3 Automatic start stop control
4 Safety
instructions
5 Rocker
switch
: On
: Off, Reverse
6 Name
plate
3
Machine components
4 Scope of delivery
5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Swit ching paper shredder off
• Tap rocker switch .
Switch returns to ze ro po si ti on.
T
• Paper shredder, ready for connection, in
carton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries
• 10 waste bags, order no. 1.661.995.150
• Special cutting block oil 250 ml
order No.: 1.235.997.403
See page 68 for our customer service ad-
dresses.
Shredding CDs and credit cards (see
“Proper Use”)
WARNING
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card in centre of the feed
opening.
Switching the paper shredder on
• Press rocker switch .
Rocker switch locks in place.
Paper shredder is ready for op-
eration (standby).
Feed paper
• Insert the paper to be de-
stroyed. See “Technical data”
for sheet capacity.
Automatic start stop control
starts the cutting system auto-
matically.
Paper is pulled into cutting
system and shredded.
When the paper fee ding opening is free
again, the cut ting sy stem au to ma tical ly
swit ches off af ter app rox. 3 sec. and returns
to standby.
S