Formax FD 404A1, Operator'S & Parts Manual

Page: 7 / 12

3
Paper Tray Tilt Adjustment
1. Hold the lower center of the paper tray. NOTE: Keep hands and fingers away from the lower portion of the
paper tray to avoid injury.
2. Loosen the tilt adjustment knob and adjust tilt angle.
3. Tighten adjustment knob. Be sure it is well tightened so it won’t become loose during jogging.
In general, the paper tray is tilted vertically for thick paper (Fig. 1). For thin paper, set the paper tray horizontally
to prevent the paper from being bent and folding over. (Fig. 2).
Fig. 1
Keep fingers away from this area
when adjusting tilt angle
Fig. 2
OPERATION
Basic Jogging
When the AIR adjustment knob is turned to the right (ON), air blows through vents in the paper tray while the
machine is operating.
When the JOG adjustment knob is turned to the right (ON), the paper tray vibrates.
For jogging regular paper, both switches should be set to ON, while the air-only option can be used to loosen
paper or dry ink.
Power Switch
Setting
Timer Setting Result
ON OFF Jogger operates continuously
ON ON Operation begins immediately
FOOT OFF Jogger operates continuously once foot switch is pressed
FOOT ON Operation begins by stepping on the foot switch
Tilt Adjustment Knob