background image

1

Hopper Capacity

Up to 250 sheets 20#

Speed:

Up to 7,700 sheets per hour

Paper Size:

Up to 8.5” x 14”

Fold Types:

C, Z, V, Double Parallel

Dimensions:

24” L x 14” W x 16.5” H

Machine weight

25 lb.

Power supply

120V, 50/60 Hz .6A

DESCRIPTION

Control Panel

Back Cover

Infeed Tray

Front Cover

Paper Guides

Outfeed Conveyor

Lower Fold Plate

Upper Fold Plate

Outfeed Tires

FUNCTION

The Formax FD 314 Low-Volume Document Folder is designed to fold various paper sizes. The fold plates are 

manually adjusted for C, V, Z  and double parallel folds.

SPECIFICATIONS

• The FD 314 is designed only to fold paper.

• Use the FD 314 in indoor locations only.

• Discontinue use if power cord is frayed or damaged. Contact Formax for assistance.

• Discontinue use if the machine makes unusual noise. Contact Formax for assistance.

• Use only the voltage specified, 120V. Do not attempt to alter this.

• Before using the machine, read all instructions carefully.

• To reduce the possibility of injury, children should not be allowed to operate the machine.

• Keep fingers, hands, loose sleeves, jewelry, hair away from the machine.

• If paper is jammed, switch off power and unplug from outlet. Remove fold plates from the machine and 

  remove jammed paper.

• When replacing the fuse, use the same type specified. Disconnect machine from power supply then replace 

  fuse. (Remove the front cover to access the fuse).

SAFETY GUIDELINES

Summary of Contents for FD 314














Reviews: