5
SETUP AND OPERATION
1.
Connect the cord to the conveyor and plug it
into the wall outlet.
2.
Set the height of the conveyor to match the
outfeed of the printer/feeder. Carefully loosen
the two knobs on either side of the conveyor
stand to raise or lower the stand height, a
second person may be required. The top of
the conveyor should sit below the exit of the
printer when rolled into position.
3.
Turn the black power switch to the on position.
The blue runout button will light up when the
power is in the on position.
4.
Setting the stacking shingle. Use the speed
control knob to adjust the tightness of the
shingle stack. Slower speeds will create a
tighter shingle, faster speeds will increase the
shingle spacing. Adjust the stacker wheels in
or out to accomodate the envelope comong
out of the printer. Closer for smaller media
and further out for larger media.
Press and hold the blue runout button to
neatly gather media off the conveyor.
Runout Button
Speed Control
Power
Stacker Wheels
Shingle Distance
