background image

Q

uick

 S

tart

 G

uide

Step 1

Unpack your ColorMax 7:

Remove the printer and accessories 

from the packaging.  Store the packing 

material in a safe place.

Set the printer onto a level, stable 

surface.  Use a carpenter’s level to make 

any adjustments to the work surface 

where the ColorMax 7 will be operating.

A level surface is very important to the 

proper operation of the ColorMax 7, and 

the electronics of the unit will check for 

it once powered up.  Do not move the 

unit while the power is on.

Step 2

Install Media Guides:

Locate the side guides and rear media 

support guide in the accessory box 

(wrapped in foam).

Install the side guides to the hopper 

brackets where the mounting screws 

are taped in place.  The rear media sup-

port guide mounts with the large rub-

ber thumbscrew on the back plate, and 

the media support wedge attaches to it 

with a thumbscrew.

When complete, your machine should 

look like this:

Step 3

Connect Power:

Make sure that the main power switch 

(item 1 in the image below) is in the OFF 

position.

Plug the AC power cord into the recep-

tacle on the printer, located below the 

main power switch.

Plug the other end of the AC power 

cord into a 115V AC, 60 Hz (or 230V 50 

Hz for international) grounded outlet 

with a high-quality surge protector.

DO NOT 

turn on 

the power 

switch (1) 

at this time!

Please turn to side 2

Reviews: