HD 13B13 Rev0 Dec 22, 2017 2 of 8
Locate other pedestals using installation tape.
4.
The positions of the pedestals are shown in the
illustration
. Use the center mark on the leading
edge of the pedestals for accurate measuring.
The fingers incorporated on the leading edge of
the pedestal will help ensure the correct position
relative to the hood edge. When correctly
positioned the fingers should contact the leading
edge of the hood.
5.
Place the hood deflector on the pedestals to
confirm proper positioning. Ensure the holes
in the deflector align with those in the
pedestals. If necessary, reposition the
pedestals so all attachment positions are
correct and the deflector is well centered.
6.
Remove the hood deflector, and outline the
perimeter of the pedestals with masking tape or
the repositionable tape strips supplied to help
final installation.
7.
Remove the pedestals and thoroughly clean the
outlined area with the alcohol wiping pad. This
will insure all wax, finger prints and oils are
removed from the hood surface in the bonding
area.
