6
SCOOTER FOLDING
1.
Slide the protective cover upwards.
EN
2.
Slide the buckle down
3.
Snap the hook into the hook.
SCOOTER CHARGING
1.
Make sure the charging socket is clean and dry.
2.
Connect the charging cable to the AC adapter.
3.
Connect the power adapter to a 100-240 V AC power outlet.
4.
Connect the output cable from the charger to the charging socket of the scooter, the LED on the power
supply will light up red.
5.
When the LED turns green, charging has finished.
6.
Disconnect the charger.
IMPORTANT NOTES ABOUT CHARGING
If the green light on the charger does not turn RED after connecting your scooter, check tha the cables are
properly connected; or the scooter is already fully charged. Press and hold the power button to check the
battery status on the display.
Do not overcharge, as this will affect the battery life.
The best charging temperatures are between 0 ° and 40 °. Extreme cold and extreme
hot will prevent the battery from fully charging.
Remember to disconnect the charger from the power supply before using the scooter
Only use the scooter charger included in the kit.
If the scooter is turned on after inserting the plug, the battery indicator will start Flash
Summary of Contents for MAX CS-510
Page 1: ...ELECTRIC SCOOTER CS 510...
Page 2: ...1 5 2 5 5 1 5 3 5 5 2 5 4 6 7 8 9 3 10 4...
Page 17: ...13...