will be automatically synchronized and set after establishing connection with a dedicated application via Bluetooth. Language of the
device will be automatically adapted to the one set in the phone.
To activate the smartwatch, press and hold any button for 5 seconds. Activation will be indicated with vibrations.
Charging:
Place the smartwatch on the dedicated docking station in a way to connect charging connectors together, and then connect USB
cable to a power source.
After completion of the charging process, disconnect the smartwatch from the power source.
Turning the smartwatch on/off
Turning on: Press and hold any button for 5 seconds until the smartwatch activates, which will be indicated by vibrations.
Turning off: Scroll the main screen down to open a pop-up menu and select the symbol
, and then confirm activation of the
smartwatch.
Forever GoFit application installation
Find application called “Forever GoFit” in Google Play or App Store and install it. You may always scan the QR code located on the
package.
NOTE:
The operating system of the phone must have the following minimum specifications to run the application and support the
smartwatch:
Android 5.1 or higher
iOS 10.0 or higher
Connect the smartwatch with the phone
1. Activate Bluetooth in your phone.
NOTE:
To be able to use all functions of the application and the smartwatch, during the first launching, allow the application to access all
required functions, and then also activate access to notifications in settings.
2. Activate “Forever GoFit” in the phone. Start using the application as a “Guest” by clicking the upper right part of the screen or
select “Register” and follow the steps below:
– enter the email address you want to use to create an account
– press the button (obtain verification)
– a verification code, which must be entered in the indicated field, will be sent to your email
– enter and remember your user password
3. After logging into the application, you will see the main screen, in which you should click
button or select menu
in the
upper left corner
4. Select the smartwatch model you want to connect with by clicking its picture: