In the first setting point, we can change the speed and cutting force, plus additional settings,
e.g. turning off the lamp in the machine. An additional option is the possibility of a test cut to
check the correct setting of the cutting depth. Important: the cutting speed parameter should
be set as low as possible because the lower the speed, the more accurate the cut.
The second point is connecting to a WIFI network where we can change the access point.
The third setting point is the place where, in order to be able to cut the foil, we must enter the
code from the foil package, which is on the back of the package.
The fourth point is to change the language setting of the software.
The fifth point is a place where we can check the statistics of cut foils and what models we
cut foils for.
C2. How to cut
First, we need to put a sheet of foil in the machine (see point 4B of the instructions).
Important: the sheet should be placed directly in front of the cutout as long-term storage in
the device may cause dents in the film.
Next, we choose the device for which we want to cut the film smartphone, watch, camera or
other.
If we have chosen a smartphone, we can see different brands of devices, for example
(Huawei). Then there is a list of models of a given manufacturer, we select, for example,
(Enjoy 50z) and various types of foil cuts appear. At this point, we can choose what type of
transparent foil cut we need:
Front - i.e. cutting the foil for the entire screen (not recommended if the customer uses a
phone cover
