EN © 2022 FOREVER.
All rights reserved.
Car camera
17
8. USE
BEFORE FIRST USE - CHARGING THE BATTERY
Before switching on the device for the first time, charge the battery using the car
adapter included in the kit or the USB mains adapter which is not included in the kit.
If there are problems with the battery or if it needs to be replaced, the device should
be delivered to the manufacturer's service centre. Incorrect charger connection of the
microUSB cable may cause damage to the device. All damages resulting from improper
handling
are not covered by the warranty.
The device can heat up during charging. It is a regular occurrence and should not
affect the stability or performance of the device. Do not leave the charged device
unattended, as this may result in fire or damage to equipment and other
environmental hazards.
If the device does not charge correctly, deliver it with the charger to the
manufacturer's service centre.
The battery installed in the device is not designed for long-term, continuous power
supply. Its function is to maintain power supply in case the ignition is switched off in
the car, e.g. during a short stoppage.
To start charging your device's battery, connect the included car adapter to your car's
cigarette lighter socket and the micro USB plug of the adapter cable to the micro USB
connector (5) on your device. The device will automatically switch on and the battery
symbol next to the watch will flash.
Low battery charge is indicated by a message on the device screen.
SWITCHING THE DEVICE ON AND OFF
Before use, insert a memory card of up to 32 GB in the micro SD card slot and perform
the formatting process in the settings menu.
The device switches on automatically once the power supply is on. The device is
switched by pressing POWER (9) button for about 2 seconds.
If there is a memory card in the micro SD card slot (5) during auto or manual switch-
on, the unit will start recording video automatically.
In the settings menu, you can enable the camera to automatically switch off after a set
period of inactivity - one or three minutes.
SETTINGS MENU
To activate the settings menu, make sure that video recording is turned off - it is not
possible to activate the settings menu during recording. Press the M button (12) to
enter the settings menu.
Menu navigation is by means of the up (10) and down (11) buttons. The POWER button
(9) is used to confirm the selection and the M button (12) to exit the menu
