Wagon Wheel Wooden Bench www.foreverredwood.com
ASSEMBLY INSTRUCTIONS
Thank you for purchasing Forever Redwood patio furniture. Forever Redwood is built by Old-Growth Again
Restoration Forestry (OGA). OGA is dedicated to restoration forestry. Sales of patio furniture finance our
restoration work in California redwood forestlands.
Tools required
: ½-inch ratchet and a mallet or small hammer.
The parts that go together have the same numbers written next to the predrilled holes they attach to.
Align the parts with the numbers as shown for ease of reference
Step 1:
Attach sides to seat. You’ll notice that seat has numbers next to the predrilled holes
that corresponds to each side. Match the numbers and attach with two carriage bolts, washers and
nuts per side. The bolts should tap into their holes. If you have to force a bolt, the leg is probably not
oriented properly, is in the wrong hole or it is turned around. Make sure the bolts are tapped all the
way into the wood, then add washers and nuts and tighten with a ½-inch ratchet. Do not over tighten
or you’ll crush the redwood and weaken the bridge’s structure.
3 ½” x 5/16” Bolts