The Stoa Pavilions www.foreverredwood.com
Step 3.
Attach dual support beam in the other direction to posts with two bolts (8 ”x 3/8”) washers & nuts.
(Match numbers). Tap the bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the other dual support beam.
Step 4.
Attach small post to dual supports with two bolts (8 ”x 3/8”) washers & nuts. (Match numbers). Tap
the bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the
other side.
Attach with carriage bolts, washers
and nuts. The quantity of bolts
depends on supports length.
