P| 4
THE GARAGE ARBOR KITS
www.ForeverRedwood.com
NOTE:
In order to know where the post needs to be placed, check the numbers on them. If the post is not marked, then place
the single Supports on the ground to locate the markings for each post position and clearly set your bearings. (“Don´t attach yet,
only place them on the ground to begin with”).
Step 1:
Placed your posts.
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2:
Attach the supports
(2)
to the posts with 5/16´´ X 5 ½ Bolts
(C)
. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
1
2
2
1
5/16´´ X 5 ½ Bolts