Kid’s Wooden Rocking Chairs www.foreverredwood.com
ASSEMBLY INSTRUCTIONS
Thank you for purchasing Forever Redwood patio furniture. Forever Redwood is built by Old-Growth
Again Restoration Forestry (OGA). OGA is dedicated to restoration forestry. Sales of patio furniture
finance our restoration work in California redwood forestlands.
Tools required
: ½-inch ratchet and a mallet or small hammer.
Your furniture was fully assembled in the shop prior to being dismantled for shipping. All the parts fit.
The parts that go together have the same numbers written next to the predrilled holes they attach to.
Please take the time to align the parts with the numbers. If you are forcing a bolt in, the part may be
turned around or not aligned properly. Tap the bolt all the way into the wood to set it, then add a
washer and lightly tighten. Don
’
t over tighten or you will crush the redwood.
Step 1
:
Attach seat to arm with 2 bolts, washers and nuts per side. Match up the numbers
written next to the holes.
Step 2
:
Attach backrest to arms with 2 bolts, washers and nuts per side. Match up the numbers
written next to the holes. Tap the 4 carriage bolts all the way into the wood and through both the arms
and the chair seat. Then insert the washers and nuts from the interior side of the chair seat and tighten
with a ½-inch ratchet. Do not over tighten or you'll crush the redwood and weaken the chair's structure.
3 ½” x 5/16” Bolts
3 ½” x 5/16” Bolts
