Arched Pergolas Without Lattice Panels
www.foreverredwood.com
STEP 2:
Attach supports to posts
with four bolts (6 ½
” x 3/8”) washers &
nuts. (Match numbers). Tap the bolt
all the way into the wood to set it, then
add a washer and nut and lightly
tighten.
Repeat this step with the other
supports
.
STEP 3:
Attach corner rafter to posts
with one bolt per post (6
½” x 3/8”
)
washers & nuts. (Match numbers).
Tap the bolt all the way into wood to
set it, then add washer and nut and
lightly tighten.
Repeat this step with the other
supports.
STEP 4:
Attach brace (28”) to post & rafter two bolts, washer & nuts. (Match numbers). Tap the bolt all the
way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the other supports.
STEP 5:
Attach shorter brace (22”) to post & rafter two bolts, washer & nuts. (Match numbers). Tap the
bolt all the way into the wood to set it, then add a washer and nut and lightly tighten.
Repeat this step with the other supports.
