Thermometer Overview
The product is a durable, data collecting, environmental thermometer. The water
resistant plastic housing incorporates a cover and rubber gaskets. There are two
temperature probes with 3 meters of cable that capture data independently of one
another. The digital thermometer collects and stores current day, plus six days of
MAX/MIN data from each sensor. Smart circuitry collects data regardless if the
LCD display is on or off. Collected data is easily and clearly displayed on the large
LCD panel in either ˚F or ˚C.
How to use the thermometer
1.
Install AA batteries:
Battery compartment is located on the front side. When
closing the compartment, make sure gasket is properly seated to prevent
moisture from entering.
2.
Choose ˚F or ˚C:
Press the ˚F/˚C button. Each press switches between ˚F or
˚C.
3.
Install thermometer:
Determine where to place the thermometer (it can be
used indoors or outdoors). Use the 2 mounting holes to hang thermometer
onto a surface.
4.
Placing the Probes:
Each sensor has approximately 3 meters of cable. Extend
the cables and place the probes where you would like to take the readings. For
example, one probe could be in the ground soil while the other probe is in the
air.
5.
Reset the thermometer
: Press the “Reset” button to begin a new collection
sequence.
6.
View the temperature reading:
Temperatures from each sensor are collected
for the current 24 hour period and up to six previous 24 hour periods. The
left and right sensors each have their own On/Off, MAX and MIN Buttons.
Pressing the “On/Off” button activates the LCD display. The first press of the
MAX or MIN button will show the current reading (up to previous 24 hours).
With each subsequent press of the MAX or MIN button displays the previous
24 hour period temperatures. 24 hour periods are indicated as D1 (for day 1),
D2 (for day 2), etc... up to D6.
Special Notes to remember:
• The LCD display will turn-off automatically within 10 minutes. The
thermometer is always collecting data even while the LCD display is on or off.
• Only the six previous days of data are collected and stored.
• Always keep the rubber gaskets in place when closing the battery compartment.
• Close the cover whenever possible to protect the LCD display and operation
buttons.
• If using the thermometer in very low temperatures, it is recommended to use
lithium AA batteries.
THERMOMETER DIAGRAM
RESET
C˚/F˚
Protective cover
Left sensor display area
Right sensor display area
LCD panel
Battery indicator
Right sensor buttons
Reset button
Left sensor buttons
AA Battery compartment
Right sensor cable
Left sensor cable
˚F/˚C button
Holes for
mounting
65.
5˚F
32.
3˚F
MIN
MAX
D.
2
D.
2
Right sensor
Left sensor
