How to charge
The charger logo will glow
red when the battery is
charging.
By following the signals, you will know at what stage charging is at.
When the battery is fully
charged, the charger will
glow green.
Connect the charger into the
wall socket.
If there is an error during
charging / communication
error, the charger will
flash red.
Charging signals
Before the first ride, please fully charge your bicycle! This bicycle uses electronic components and
high-performance Lithium-Ion batteries. Please take the time to inspect the components and display regularly.
Occasionally monitor the charging process. Batteries are considered dangerous flammable material, therefore make
sure you carefully follow the user manual instructions. Charge your bicycle according to the manufacturer
specifications by using only the originally provided charger. Failure to do so may result in malfunction and serious
injuries.
18
Push the plastic cover on top
of the motor to uncover the
charging port.
Connect the charger
to the Rosenberger charging
port.
If the charger is connected
to the power but not
connected to the bicycle,
it will flash green.
Summary of Contents for Siryon
