684mm
684mm
684mm
684mm
1
2
Place the Post Rafter on the floor and
position the brackets.
Fix a U-bracket, flush at each end using 2 x 25mm screws.
Repeat the process on the other Post Rafter.
Slot the Post Rafter into the two Posts. Ensure the rafter is flush at each end.
Secure the Post to the Post Rafter using 2 x
120mm coach bolts per Post.
Thread the bolt through the pre-drilled hole and tighten with a washer and nut on the opposite
end. Repeat the process for the other Posts.
CONSTRUCTION
130mm
750mm
PREPARATION
We
strongly advise
that you
anchor
your pergola down with either fixtures shown below to
enhance stability.
You will need to purchase these
separately.
Apply each fixture to each leg before fully constructing your pergola. 130mm of your post will be supported within the fixture.
FOR PATIO/DECKING (HARD SURFACES)
Easy-Fit Fencebase - 90mm
(
FBEF90
)
FOR GRASS/SOIL
(SOFT SURFACES)
Easy-Fit Fencefast
(
FEF9075
)
Ensure that the spike can be
inserted into the ground by
750mm.
2160mm
25
MM
SCREWS
Before securing the central U-brackets,
layout the Slatted Panels
to ensure they will fit into the space provided.
Fix the rest of the
U-Brackets into place.
120
MM
BOLTS
POST RAFTER
SLATTED PANEL
POST RAFTER
POST
