Forest SHUTTLE iOn, Installing

Page: 2 / 8

2 │ Installing the FOREST SHUTTLE ® iOn battery motor v1.1
Installing the FOREST SHUTTLE® iOn:
Assemble the track;
Install the brackets and fix the track onto the brackets;
Do not attach the drapery yet;
Attach the drapery only after the end positions have been set.
→ position the master carrier(s) into half open position
Attach the Shuttle® iOn motor to the track;
Note: Remove the battery before connecting the Shuttle® iOn motor to the curtain track.
Insert the battery;
Remove the security cap from the battery and insert the battery, push until a “click” is heard.
Setting the end limits of the
FOREST SHUTTLE® iOn ;
The stack back (adjusted open limit) can be set by remote or switch. For programming see page 6.
SETTING MOTOR DIRECTION AND CLOSE LIMIT:
The Shuttle® detects automatically the motor direction. By pulling the master carrier(s) towards closed position first,
the Shuttle® will automatically learn that motor direction. The master carrier will travel automatically towards the
closed position.
Remove the
Security cap!
Slide the
locking pin
in the upper
position!
To remove the battery,
first remove the strap