REMOVING THE PROTECTIVE FILM
5
13
Attach the Door Handle above the Latch and in your
desired position.
Ensure the latch and handles are fitted in
a position where the Latch can operate.
14
Position the Fascias before securing into place.
Ensure
the edge of the Fascia’s are flush to the apex framework as
shown above.
15
Secure the Fascias to the apex framework onto the Front
Panel.
1
2
PEEL THE PROTECTIVE FILM OFF BY HAND
Simply find a loose edge or corner around the frame and peel back to completely
remove the film on that surface. There will be protective film on the front and back
surface of each window.
APPLY WARM SOAPY WATER
We recommend applying warm soapy water to the surface to help loosen the film and
rub firmly with a sponge or cloth to remove the adhesive residue. We advise warm
soapy water as many solvents and harsh chemicals can damage the styrene window’s.
3
STANLEY KNIFE
If the previous options are unsuccessful, we advise to carefully use a Stanley Knife in
a corner of the frame to provide a starting point to peel the protective film. Use the
window frame as a guide.
Be careful not to scratch the window’s surface.
We strongly
advise to use cut-resistant gloves to prevent any harm to yourself.
Remove the rest
of the protective film by hand.
We cannot be held responsible for damages incurred when not following the outlined
procedure.
CHECK & TIGHTEN ALL FIXINGS APPLIED TO THE PRODUCT ON A REGULAR BASIS
