3
4
Place the Seats on top of the legs.
Ensure the End
Legs slit into the notches provided. The Seats will rest
on top of the Corner Leg.
Position the Corner Leg as shown above.
Ensure the
Central Leg is centralised between pre-drilled holes on
the batten, before securing into place.
Ensure the End Legs are flush to the Seats.
Fix the End
Legs into place using 4 x 60mm screws on the outside
and 4 x 100mm screws on the inside per End Leg.
Position the Corner Leg as shown in the Central Leg
Position.
Fix into place, into the pre-drilled holes
provided using 4 x 60mm screws each side.
HEALTH & SAFETY
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are protected from
any potential health and safety risks.
Do not exempt yourself from wearing PPE.
60
MM
SCREWS
60
MM
SCREWS
CENTRAL LEG POSITION
SEAT LH
SEAT RH
100
MM
SCREWS
100
MM
SCREWS
60
MM
SCREWS
5
CHECK & TIGHTEN ALL FIXINGS APPLIED TO THE PRODUCT ON A REGULAR BASIS
