background image

 

FOREST MULTI REMOTE - 5201001460 

TECHNICAL SPECIFICATION:

 

● 3V battery CR2430

● transmit range indoors max. 30mtr

● battery life > 3 years

● working temperature -10°C - +50°C

● frequency 433.92MHz

● modes: manual, timer and dynamic timer (15 m and -)

● transmit power 10mW

● each channel can control up to 20 receivers / motors

selected channel

 

manual/auto/dynamic mode 

mode button 

open/up button 

stop button 

time button 

close/down button 

non applicable

 

c/- 

battery slide (CR2430) 

SET TIME:

  PRESS MODE TO SET 

  PRESS TIME FOR ~7SEC.  

  PRESS BUTTONS TO  

  PRESS TIME TO 

  PRESS TIME  ~7SEC.  

  PRESS TIME ONCE 

    MODE TO MANUAL 

→ 2 DIGITS W ILL BLINK

 CHANGE TIME       

  TOGGLE BETWEEN 

    UNTIL ALL DIGITS 

MORE TO FINISH 

     ‘man’ ON DISPLAY 

  HOURS/MINUTES 

      STOP BLINKING       

  AND START CLOCK 

BEFORE SETTING THE TIMER, SET THE CLOCK! 

SET TIMER (EACH CHANNEL SEPARATE):

 

  PRESS MODE TO  

  SELECT CHANNEL  

  PRESS TIME FOR  

    PRESS BUTTONS TO   

  PRESS TIME TO  

  PRESS MODE TO SW ITCH 

  SET MODE TO 

  ~7SEC. → HOUR 

  CHANGE OPEN▲ TIME  

  TOGGLE BETWEEN  

  TO CLOSE▼TIME 

  AUTO OR DYNAMIC 

  DIGITS W ILL BLINK 

  HOURS/MINUTES 

   PRESS BUTTONS TO   

  PRESS TIME TO  

  PRESS TIME FOR ~7SEC.  

  SET MODE TO 

CHANGE CLOSE▼ TIME  

  TOGGLE BETWEEN  

      UNTIL DIGITS STOP       

  AUTO OR DYNAMIC 

  HOURS/MINUTES  

   BLINKING → FINISHED

11/2013  WDOC MULTI REMOTE 

 866-823-3894  /  www.forestdh.com 

 1/4 

Summary of Contents for 5201001460

Page 1: ...TTONS TO PRESS TIME TO PRESS TIME 7SEC PRESS TIME ONCE MODE TO MANUAL 2 DIGITS WILL BLINK CHANGE TIME TOGGLE BETWEEN UNTIL ALL DIGITS MORE TO FINISH man ON DISPLAY HOURS MINUTES STOP BLINKING AND START CLOCK BEFORE SETTING THE TIMER SET THE CLOCK SET TIMER EACH CHANNEL SEPARATE PRESS MODE TO SELECT CHANNEL PRESS TIME FOR PRESS BUTTONS TO PRESS TIME TO PRESS MODE TO SWITCH SET MODE TO 7SEC HOUR CHA...

Page 2: ...01 A Time between open time and close time must be more than 30 minutes apart Q Timer only works on one channel A Only the selected channel will work as a timer Use channel 00 to turn on all timers all channels Q I can t succeed programming a remote wall switch RF to a receiver A During programming keep the remote wallswitch RF close to the receiver max 0 5 mtr BATTERY EMPTY After changing the bat...

Page 3: ...PREVIOUS SWITCH TO RECEIVER REMOTE WALL SWITCH PROGRAMMED REMOTES WALL SWITCHES press program button led will blink press program button led will blink press stop and close button of receiver for 6 sec or or press stop button press stop button led will blink and will go off press program press program button led will button led will light up light up hold the remote wallswitch within 0 5 mtr from ...

Page 4: ...l can also be used as wall switch working temperature 10 C 50 C works on to Forest Multi Remote and programming identical to Shuttle Multi Receiver Forest Multi Wall Switch RF program button control led open up button stop button close down button WIRING DIAGRAM 11 2013 WDOC FMS BCS MULTI RECEIVER 866 823 3894 www forestdh com 4 4 ...

Reviews: