forest-style Abri NYASSA, Manual

Page: 12 / 52

-
any natural evolution relating to wood.
In the case of overlapping structure, please remember that all boards always have one better looking side, which should face
the outside of the shed (the other side can have slight defects due to planning, bark, cracking etc.). The warranty covers all
defects in workmanship or material and is limited to repair or replacement of the defective part. Any possible costs of
assembly, disassembly and impregnation are not covered. The warranty explicitly does not cover any claims or compensation.
In the case of supply at an address of residence, any complaints concerning the condition of the goods supplied are accepted
only in the form of a prepaid registered letter sent within 48 hours from the moment of supply of the product to a given
carrier (details of the carrier are given in the shipping document). We assume no liability for any damage resulting from
the scope of our liability. If, as an exception, such products are accepted, the client may be charged with any possible costs
of repair or transport. We never accept already assembled products. As far as wooden products are concerned, please
remember that timber is a living material that may naturally deform. Any claims regarding deformed elements must be
accompanied by photographs of such elements.
Warranty terms: The following uses are excluded from the product warranty :
-
Misuse of the product or under "conditions of use not reasonably foreseeable ,
-
Non-compliance with the rules of the art of implementation of the product,
-
Use of the product for professional purposes not suited to the primary function of the product,
-
Modification of all or part of the product or one of its components,
- Use of spare parts that are not original,
-
Use of cleaning and / or decoration products not recommended by Forest Style and / or not suitable,
- Severe weather (wind> 100km / h and snow> 20cm) or natural disaster, flood, storm, fire etc.,
-
Use in the case of a place of residence,
-
Product degradation caused by foundations made outside of the state of the art,
-
Defects caused by poor ground levelness,
- Storage and assembly defects as well as insufficient protective treatment.
Service: For replacement parts, please contact the distributor and show the quality control sheet attached to this manual.
Service requests will not be considered without the above mentioned documents.
Please keep the quality control sheet attached to this assembly manual in a safe place. It is required for
the purpose of complaint consideration.