Propane is stored in the tank under extreme pressure,
leaving space in the tank to allow for expansion into
vapor. The vapor is reduced in pressure by passing
through a regulator. This reduction in pressure is a two-
step process which ensures consistent pressure for use,
regardless of outside temperatures, weather, or altitude.
Propane Containers
Propane containers are tested to withstand pressures in
excess of anticipated normal usage. Additionally, every
propane container has a built-in safety filling feature. The
containers are designed to be filled only to 80% of
capacity with propane. Filling the container to only 80%
naturally allows 20% for vapor space. The extra space
allows vapor withdrawal through the QCC1 Acme con-
nection and also allows expansion space for the liquid. If
the tank were completely full, a rise in outside tempera-
ture could result in relief valve discharge of propane.
Attaching the Propane Container to the Camper
(20 lb. Bottle)
1. Attach the propane container bracket to the ‘A’
frame using the two ¼ inch 20 NC hex head bolts
provided.
2. Place the propane container into the bracket and
tighten the clamp ring. Be sure the container is
properly seated.
3. Attach the regulator assembly to the service valve.
(It is left-hand threaded.)
4. Slowly tighten the QCC1 Acme connection. DO
NOT OVER-TIGHTEN. This is a machined, male,
brass fitting which seats against a female fitting.
5. Be sure the regulator vent faces downward and that
the regulator cover is kept in place to minimize vent
blockage.
6. Before opening the service valve, allowing propane
to flow into the system, be sure all propane appli-
ances are turned off.
7. Open the tank service valve
slowly
and check all
connections for leaks as outlined further in this sec-
tion.
8. Follow the manufacturer’s instructions carefully
when lighting a propane appliance.
W ARNING
Vent blockage can result in excessive propane
pressure, which can cause fire or explosion. Keep
the regulator protective cover in place to minimize
this danger and protect the regulator from the ele-
ments.
W ARNING
Never use a propane tank different than the one
furnished with your camper. If the tank must be
replaced, check with your dealer for correct tank
specifications and replacement procedure. Keep
the tank securely mounted in its proper position.
Use all the hardware provided to ensure proper
support and position.
W ARNING
Keep the tank service valve accessible at all times.
In an emergency, it may be necessary to quickly
access the valve to shut off the propane flow.
Filling Propane Containers
Before removing the propane container for refilling, or
doing any work on the propane system, extinguish all
open flames and smoking materials.
Procedure for Filling Propane Containers
1. Turn off all propane appliances and extinguish their
pilot lights.
2. Close the service valve on the propane tank and
remove the QCC1 Acme connection, which has a
left-handed thread and must be turned clockwise to
remove. Never use a wrench to close the service
valve. If leaking occurs when closing by hand, have
the valve repaired or replaced.
3. Cap or seal the valve inlet to prevent the entrance
of dust and dirt.
4. Loosen the clamp ring bolt and remove the con-
tainer from the camper. Always transport the pro-
pane bottle in the upright position. Never transport,
install, or use a vertical tank in a horizontal or
upside down position.
5. Take the container to a qualified propane supplier.
6. Have supplier connect the fill nozzle to your tank fill
connection.
LIVING QUARTERS
26
